Kia Sportage 2008, Manual, Page: 223 / 227

7/6/12 https://www.kiatechinfo.com/viewer/toc_print.asp?vehicletype=Passenger&mfrcode=KM&area=KM…
223/227 https://www.kiatechinfo.com/viewer/toc_print.asp?vehicletype=Passenger&mfrcode=KM&area=KM…
ground.
(4) Measure resistance between the terminal 6 and 7 of the Instrument Cluster harness connector (M06­2).
specification(resistance) : infinite
(5) Is the measured resistance within specification?
►
Check open circuit.
►
Repair the short or short to ground circuit on wiring harness between the SRSCM and the Warning Lamp.
7. CHECK OPEN CIRCUIT
(1) Measure resistance between the terminal 6 of the Instrument Cluster connector (M06­2) and the terminal 26 of
SRSCM harness connector.
specification(resistance) : below 1 Ω
(2) Is the measured resistance within specification?
►
Go to next step.
►
Repair the open circuit on wiring harness between the SRSCM and the Warning Lamp.
8. CLEAR THE DTC AND CHECK THE VEHICLE AGAIN
(1) Install the DAB module and connect the DAB connector.
(2) Connect the connectors of the PAB, SAB, CAB, BPT, BUPT, FIS and SIS.
(3) Connect the SRSCM connector.
(4) Connect the negative (­) terminal to the battery.
(5) Connect a Hi­Scan(Pro) to the data link connector.
(6) Turn the ignition switch to ON.
(7) Clear the DTC stored in the SRSCM memory with the Hi­Scan(Pro).
(8) Turn the ignition switch to LOCK and wait for at least 30 seconds.
(9) Turn the ignition switch to ON and wait for at least 30 seconds.
(10) Check the vehicle again with the Hi­Scan(Pro).
Does the above DTC(s) go off?