manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 68 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 68

65

■

■

Charging stopped. Please
check the AC/DC charger

• This warning message is dis-

played when charging is stopped
for the reasons below:
- There is a problem with the exter-

nal AC charger or DC charger.

- The external AC charger stopped

charging

- The charging cable is damaged.

• If this occurs, check whether there

is any problem with the external
AC charger or DC charger and
charging cable.

• If the same problem occurs when

charging the vehicle with a well-
functioning AC charger or genuine
Kia portable charger, Kia recom-
mend that you have your vehicle
inspected by an authorised Kia
dealer/service partner.

■

■

Charging interrupted. Please
check the Cable Connection

• This warning message is dis-

played for the reasons below:
- The charging connector is not

correctly connected to the charg-
ing inlet.

- 

The charging connector lock

release button is pressed.

ODEEVQ018070R/ODEEVQ018071R

■

AC charge

■

DC charge

ODEEVQ018072R

DRIVING ELECTRIC VEHICLE

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments