manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 587 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 587

7 65

Maintenance

Light bulb position (Side)

(1) Side repeater lamp (LED type)

Headlamp (LED type) replace-
ment

If the Low/High beam lamp, Day time
running lamp/Position lamp does not
operate, have your vehicle checked
by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the head lamp (LED), for it may
damage related parts of the vehicle.

Front fog lamp bulb replace-
ment (if equipped)

If the front fog lamp (1) does not
operate, have your vehicle checked
by a professional workshop. Kia rec-
ommends to visit an authorised Kia
dealer/service partner.

OSKEV078076L

OSK3078024L

OSK3078027L

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments