manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 58 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 58

55

1. Holding the smart key, sit in the

driver’s seat.

2. Fasten the seat belt before start-

ing the vehicle.

3. Make sure to engage the parking

brake.

4. Turn OFF all electrical devices.
5. Check the position of the accelera-

tor pedal and the brake pedal and
the clearance with your right foot.

6. Make sure to depress and hold the

brake pedal.

7. Whilst depressing the brake pedal,

shift to P (Park).

8. Depress and hold the brake pedal

whilst pressing the START/STOP
button.

9. When the 

indicator is ON, you

can drive the vehicle. When the

indicator is OFF, you cannot

drive the vehicle. Start the vehicle
again.

10. Depress and hold the brake

pedal and shift to the desired
position

11. Release the parking brake and

slowly release the brake pedal.
Check if the vehicle slowly moves
forward, then depress the accel-
erator pedal.

1. Hold down the brake pedal whilst

the vehicle is parked.

2. Whilst depressing the brake pedal,

shift to P (Park).

3. Whilst depressing the brake pedal,

engage the parking brake.

4. Whilst depressing the brake pedal,

press the START/STOP button
and turn off the vehicle.

How to Start a Vehicle

How to Stop the Vehicle

DRIVING ELECTRIC VEHICLE

OSKEV048181L

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments