manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 568 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 568

Maintenance

46

7

Motor compartment fuse
replacement

1. Turn the ignition switch and all

other switches off.

2. Remove the fuse panel cover by

pressing the tab and pulling the
cover up.

3. Check the removed fuse; replace it
if it is blown. To remove or insert the
fuse, use the fuse puller in the motor
compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly in
the clips. If it fits loosely, consult an
authorised Kia dealer.

Multi fuse

✽

✽

NOTICE

Do not disassemble nor assemble the
multi fuse when it is secured with
nuts and bolts. Incorrect or partial
assembly torque may cause a fire.
Have the vehicle checked by a pro-
fessional workshop. Kia recom-
mends to consult an authorised Kia
dealer/service partner.

OSKEV078073R

OSKEV078074R

CAUTION

Always securely install the fuse
panel cover in the motor com-
partment to protect against
electrical failure which may
occur from water contact.
Listen for the audible clicking
sound to ensure fuse panel
cover is securely fastened.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments