manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 502 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 502

6 17

What to do in an emergency

10. Hose to connect compressor and

sealant bottle or compressor and
wheel

Connectors, cable and connection
hose are stored in the compressor
housing.

Strictly follow the specified
sequence, otherwise the sealant
may escape under high pressure.

Using the TMK

1. Detach the speed restriction label

(1) from the sealant bottle (2), and
place it in a highly visible place
inside the vehicle such as on the
steering wheel to remind the driv-
er not to drive too fast.

2. Screw connection hose (10) onto

the connector of the sealant bottle.

3. Ensure that button (9) on the com-

pressor is not pressed.

WARNING

- Expired

sealant

Do not use the tyre sealant after
the sealant has expired (i.e.
pasted the expiration date on
the sealant container). This can
increase the risk of tyre failure.

WARNING

- Sealant

• Keep out of reach of children.
• Avoid contact with eyes.
• Do not swallow.

OSK3068012L

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments