manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 485 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 485

Driving your vehicle

158

5

VEHICLE WEIGHT

This section will guide you in the
proper loading of your vehicle and/or
trailer, to keep your loaded vehicle
weight within its design rating capa-
bility, with or without a trailer. Properly
loading your vehicle will provide max-
imum return of the vehicle design
performance. Before loading your
vehicle, familiarize yourself with the
following terms for determining your
vehicle's weight ratings, with or with-
out a trailer, from the vehicle's speci-
fications and the certification label:

Base kerb weight 

This is the weight of the vehicle
including all standard equipment. It
does not include passengers, cargo,
or optional equipment.

Vehicle kerb weight

This is the weight of your new vehicle
when you picked it up from your deal-
er plus any aftermarket equipment.

Cargo weight

This figure includes all weight added
to the Base Kerb Weight, including
cargo and optional equipment.

GAW (Gross axle weight)

This is the total weight placed on
each axle (front and rear) - including
vehicle kerb weight and all payload.

GAWR 
(Gross axle weight rating)

This is the maximum allowable
weight that can be carried by a single
axle (front or rear). These numbers
are shown on the certification label.
The total load on each axle must
never exceed its GAWR.

GVW (Gross vehicle weight)

This is the Base Kerb Weight plus
actual Cargo Weight plus passengers.

GVWR 
(Gross vehicle weight rating)

This is the maximum allowable
weight of the fully loaded vehicle
(including all options, equipment,
passengers and cargo). The GVWR
is shown on the certification label.

Overloading

WARNING 

- Vehicle

weight

The gross axle weight rating
(GAWR) and the gross vehicle
weight rating (GVWR) for your
vehicle are on the certification
label attached to the driver's (or
front passenger’s) door.
Exceeding these ratings can
cause an accident or vehicle
damage. You can calculate the
weight of your load by weighing
the items (and people) before
putting them in the vehicle. Be
careful not to overload your
vehicle.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments