manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 471 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 471

Driving your vehicle

144

5

DRIVER ATTENTION WARNING (DAW) (IF EQUIPPED)

The Driver Attention Warning (DAW)
system is to warn the driver with any
hazardous driving situations upon
detecting the driver's fatigue level or
inattentive driving practices.

System setting and activation

System setting

• The Driver Attention Warning sys-

tem is set to be in the OFF posi-
tion, when your vehicle is first
delivered to you from the factory.

• To turn ON the Driver Attention

Warning system, turn on the vehi-
cle, and then select 'User Settings

Driver assistance 

Driver

Attention Warning 

High sensitiv-

ity/ Normal sensitivity' on the LCD
display.

• The driver can select the Driver

Attention Warning system mode.
- Off : The Driver Attention Warning

system is deactivated.

- Normal sensitivity : The Driver

Attention Warning system alerts
the driver of his/her fatigue level
or inattentive driving practices.

- 

High sensitivity : The Driver
Attention Warning system alerts
the driver of his/her fatigue level
or inattentive driving practices
faster than Normal mode.

• The set-up of the Driver Attention

Warning system will be main-
tained, as selected, when the vehi-
cle is re-started.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments