manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 47 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 47

44

9. Charging starts automatically and

the charging indicator lamp starts
to blink.

10. Check if the charge indicator

lamp of the high voltage battery
in the instrument cluster is turned
ON. Charging does not occur
when the charging indicator lamp
is OFF.

When the charging connector is

not connected properly, recon-
nect the charging cable to
charge it again.

ODEEVQ018044

ODEEVQ018034

• You can start charging when

the START/STOP button is in
the OFF position and the shift
lever is in P (Park).
After charging has started,
you can use electrical compo-
nents such as the radio by
pressing the START/STOP
button to ACC or ON position.

• If you move the shift lever

from P (Park) to R (Reverse), N
(Neutral), D (Drive), charging
stops immediately. If you want
to start charging again, place
the shift lever to P (Park) and
press the START/STOP button
to the OFF position. Unplug
and reconnect the charging
cable to start charging again.

CAUTION

CHARGING ELECTRIC VEHICLE

(TRICKLE CHARGE)

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments