manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 463 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 463

Driving your vehicle

136

5

Warning message and system
control

Rear Cross-Traffic Collision
Warning (RCCW) System

If the vehicle detected by the sensors
approaches from the rear left/right
side of your vehicle, the warning
chime will sound, the warning light
on the outside rearview mirror will
blink and a message will appear on
the LCD display. If the rear view mon-
itor system is in activation, a mes-
sage will also appear on the audio or
AVN screen.

The warning will stop when:
- The vehicle moving at the rear

left/right side of your vehicle is not
in the detection range.

- The vehicle is right behind your

vehicle.

- The vehicle is not driving towards

your vehicle.

- The vehicle’s approaching speed is

decreased.

Rear Cross-Traffic Collision-
Avoidance (RCCA) System

OSK3058093L

OSK3058094L

■ 

Left

■ 

Right

OSKEV058099R

OSKEV058098R

■ 

Left

■ 

Right

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments