manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 448 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 448

5 121

Driving your vehicle

Limitations

• Refer to [Limitation of the System]

in this chapter, [LKA]

• Refer to [Detecting vehicles] in this

chapter, [FCA]

WARNING  

• The steering control can not

completely avoid the collision
to oncomimg vehicle. Driver
is reponsible for being aware
of surroundings and steering
the vehicle for safe driving
practices.

• The function operated within

certain conditions, such as
the distance and speed from
the oncoming vehicle, the dri-
ver's vehicle speed, etc.
The function can be cancelled
or not work properly accord-
ing to road condition and sur-
roundings. Always be cau-
tious when driving.

• Never drive deliberately and

dangerously to activate the
system.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments