manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 432 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 432

5 105

Driving your vehicle

1. Press the 

/CRUISE button, to

turn the system on. The CRUISE
indicator in the instrument cluster
will illuminate.

2. Accelerate to the desired speed.

The smart cruise control speed

can be set as follows:
• 10 km/h (5 mph) ~ 160 km/h

(100 mph) : when there is no
vehicle in front

• 0 km/h (0 mph) ~ 160 km/h (100

mph) : when there is a vehicle in
front

3. Move the lever down (to SET-),

and release it at the desired
speed. The set speed and vehicle
to vehicle distance on the LCD
screen will illuminate.

4. Release the accelerator pedal.

The desired speed will automati-
cally be maintained.

Once the system starts working, the
indicator light (

) comes on the

instrument panel.
The indicator light colours according
to the system status are as follows.
Green: Active
White: Standby

For more SCC settings and details
refer to <Smart Cruise Control>

OSKEV058018L

OSKEV058019L

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments