manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 391 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 391

Driving your vehicle

64

5

(Continued)
• Do not tint the window or install

stickers, accessories around the
inside mirror where the camera is
installed.

• Make sure the frontal camera

installation point does not get wet. 

• Do not impact or arbitrarily

remove any radar/camera compo-
nents.

• Do not place reflective

objects(white paper or mirror etc.)
on the crash pad. 
The system may activate unneces-
sarily due to reflect of the sunlight. 

• Excessive audio volume may dis-

turb the sound of the system warn-
ing alarm.

• For more cautions for the camera

sensor, refer to the Lane Keeping
Assist system in this chapter.

System malfunction

• When the FCA is not working prop-

erly, the FCA warning light (

) will

illuminate and the warning mes-
sage will appear for a few seconds.
After the message disappears, the
master warning light (

) will illu-

minate. In this case, have the vehi-
cle inspected by a professional
workshop. Kia recommends to visit
an authorised Kia dealer/service
partner.

• The FCA warning message may

appear along with the illumination
of the ESC warning light.

ODEEV058203R

WARNING  

• The FCA is only a supplemen-

tal system for the driver’s con-
venience. The driver should
hold the responsibility to con-
trol the vehicle operation. Do
not solely depend on the FCA
system. Rather, maintain a safe
braking distance, and, if neces-
sary, depress the brake pedal
to lower the driving speed.

• In certain instances and

under certain driving condi-
tions, the FCA system may
activate unintentionally. This
initial warning message
appears on the LCD display
with a warning chime.
Also, in certain instances the
front radar sensor or camera
recognition system may not
detect the vehicle, pedestrian
or cyclist (if equipped) ahead.
The FCA system may not acti-
vate and the warning mes-
sage will not be displayed.

(Continued)

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments