manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 377 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 377

Driving your vehicle

50

5

ESC OFF usage

When driving

• ESC should be turned on for daily

driving whenever possible.

• To turn ESC off whilst driving,

press the ESC OFF button whilst
driving on a flat road surface.

✽

✽

NOTICE

• When operating the vehicle on a

dynamometer, ensure that the ESC
is turned off by pressing the ESC
OFF button for more than 3 sec-
onds (ESC OFF light illuminated).
If the ESC is left on, it may prevent
the vehicle speed from increasing,
and result in false diagnosis.

• Turning the ESC off does not

affect ABS or brake system opera-
tion.  

WARNING

Never press the ESC OFF but-
ton whilst ESC is operating
(ESC indicator light blinks).
If ESC is turned off whilst ESC
is operating, the vehicle may
slip out of control.

CAUTION

Driving with varying tyre or
wheel sizes may cause the ESC
system to malfunction. When
replacing tyres, make sure they
are the same size as your origi-
nal tyres.

WARNING  

The Electronic Stability Control
system is only a driving aid; use
precautions for safe driving by
slowing down on curved,
snowy, or icy roads. Drive slow-
ly and don’t attempt to acceler-
ate whenever the ESC indicator
light is blinking, or when the
road surface is slippery.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments