manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 370 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 370

5 43

Driving your vehicle

✽

✽

NOTICE

When this message is displayed, the
Auto Hold and EPB may not oper-
ate. For your safety, depress the
brake pedal.

Press brake pedal to deactivate
AUTO HOLD

If you did not apply the brake pedal
when you release the Auto Hold by
pressing the [AUTO HOLD] switch, a
warning will sound and a message
will appear.

AUTO HOLD conditions not met.
Close door, bonnet, and trunk.

When you press the [AUTO HOLD]
switch, if the driver’s door, bonnet,
trunk(tailgate) are not closed, a
warning will sound and a message
will appear on the LCD display. At
this moment, press the [AUTO
HOLD] button after closing the dri-
ver’s door, bonnet, trunk (tailgate).

ODEEV058197N

ODEEV058196N

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments