manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 369 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 369

Driving your vehicle

42

5

Warning messages

Parking brake automatically
applied

When the EPB is applied from Auto
Hold, a warning will sound and a
message will appear.

Turning off AUTO HOLD. Press
brake pedal

When the conversion from Auto Hold
to EPB is not working properly a
warning will sound and a message
will appear.

WARNING

• Press the accelerator pedal

slowly when you start the
vehicle.

• For your safety, cancel the

Auto Hold when you drive
downhill or back up the vehi-
cle or park the vehicle.

CAUTION

If there is a malfunction with the
driver’s door, trunk (tailgate),
bonnet open detection system,
the Auto Hold may not work
properly.
In this case, have your vehicle
inspected by a professional
workshop. Kia recommends to
contact an authorised Kia deal-
er/service partner.

ODEEV058193R

ODEEV058194R

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments