manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 367 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 367

Driving your vehicle

40

5

Set up

1. With the driver's closed, door,

bonnet, trunk (tailgate) or depress
the brake pedal and then press
the Auto Hold button. The white
AUTO HOLD indicator will come
on and the system will be in the
standby position.

2. When you stop the vehicle com-

pletely by depressing the brake
pedal, the AUTO HOLD indicator
changes from white to green.

3. The vehicle will remain stationary

even if you release the brake pedal.

4. If EPB is applied, Auto Hold will be

released.

Leaving

If you press the accelerator pedal
with  the shifter dial in D (Drive) or
manual mode or R (Reverse), the
Auto Hold will be released automati-
cally and the vehicle will start to
move. The indicator changes from
green to white.

OSKEV058110R

OSKEV058109R

WARNING

When driving off from Auto
Hold by depressing the acceler-
ator pedal, always check the
surrounding area near your
vehicle.
Slowly depress the accelerator
pedal for a smooth launch.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments