manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 350 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 350

5 23

Driving your vehicle

The Smart Regeneration System
controls the regenerative braking
automatically according to the road
gradient and driving condition of the
vehicle in front. The system mini-
mizes the unnecessary operation of
the brake and acceleration pedal,
improving the fuel efficiency and
assisting the driver.

System Setting

The Smart Regeneration System
enters the ready status when:
The gear is in P (Park) and select
'User settings 

Convenience 

Smart Regeneration' on the User
Settings mode.
The setting is maintained when the
vehicle is restarted.
Pull and hold the right side paddle
shifter for over 1 second to turn on
and off the automatic change of the
regenerative braking.

To Activate Smart
Regeneration System

With 'AUTO' for the regenerative
braking level displayed on the clus-
ter, the regenerative braking level is
controlled automatically when vehi-
cle speed is above 10 km/h (6 mph)
and one of the condition below is
met.
- The road gradient changes
- Distance from the vehicle ahead

reduces or increases

- Speed of the vehicle ahead

reduces or increases

SMART REGENERATION SYSTEM (IF EQUIPPED WITH SMART CRUISE CONTROL SYSTEM)

WARNING

When vehicle speed is under 10
km/h (6 mph),

the Smart

Regeneration System is can-
celled. The driver must adjust
the vehicle speed by depress-
ing the accelerator or brake
pedal according to the road
condition ahead and driving
condition.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments