manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 35 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 35

32

3. Make sure to completely close the

AC charging inlet cover.

4. Make sure to completely close the

charging door.

5. Close the protective covers of the

charging connector and the charg-
ing plug to prevent foreign sub-
stances from entering the termi-
nals.

6. Store the charging cable safely in

the storage compartment.

■

■

How to Disconnect Charging
Connector in Emergency

If the charging connector does not
disconnect due to battery discharge
and failure of the electric wires, open
the bonnet and slightly pull the emer-
gency cable. The charging connector
will then disconnect.
The charging cable lock may not
work properly when foreign materials
such as dust enter the cable or the
cable is encrusted with ice.

In that case, the charging cable may
not be disconnected from the car or
be charged.
If this happens, open the hood and
pull the emergency cable lightly 2 to
3 times before starting charging.

CHARGING ELECTRIC VEHICLE

(AC CHARGE)

OSKEVQ018010L

OSKEVQ018011L

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments