manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 347 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 347

Driving your vehicle

20

5

Regenerative Braking 
(Paddle Shifter)

The paddle shifter is used to adjust
the regenerative braking level from 0
to 3 during decelerating or braking.
• Left side (

): Increases regener-

ative braking and deceleration.

• Right side (

):

Decreases

regenerative braking and decelera-
tion.

• Pull and hold the left side paddle

shifter for more than 0.5 seconds
and One Pedal Driving function is
operated, increasing the regenera-
tive braking. In this case, stopping
the vehicle is possible by keep on
pulling the paddle shifter.

Refer to the following pages on
"One Pedal Driving".

• With the Smart Regeneration

System activated, pull and hold the
right side paddle shifter for over 1
second to turn on and off the auto-
matic change of the regenerative
braking.

✽

✽  

NOTICE

The paddle shifter does not operate
when:
• The [

] and [

] paddle

shifters are pulled at the same
time.

• The vehicle is decelerating by

depressing the brake pedal.

• The Cruise Control system or

Smart Cruise Control system is
activated.

REGENERATIVE BRAKING SYSTEM

OSKEV058106L

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments