manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 31 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 31

28

7. Connect the charging plug to the

electric outlet (220V) at a AC
charging station to start charging.

8. Check if the charge indicator lamp

of the high voltage battery in the
instrument cluster is turned ON.
Charging does not occur when the
charging indicator lamp is OFF.

When the charging connector and

charging plug are not connected
properly, reconnect the charging
cable to charge.

CHARGING ELECTRIC VEHICLE

(AC CHARGE)

ODEEVQ018034

• You can start charging when

the START/STOP button is in
the OFF position and the shift
lever is in P (Park). After
charging has started, you can
use electrical components
such as the radio by pressing
the START/STOP button to the
ACC or ON position.

• If you move the shift lever

from P (Park) to R (Rear), N
(Neutral), D (Drive), charging
stops immediately. If you want
to start charging again, place
the shift lever to P (Park) and
press the START/STOP button
to the OFF position. Unplug
and reconnect the charging
cable to start charging again.

CAUTION

OPSE0Q4038

■ 

AC Charger

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments