manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 299 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 299

140

4

Features of your vehicle

Fan speed control

The fan speed can be set to the
desired speed by turning the fan
speed control knob.
The higher the fan speed is, the
more air is delivered.
Pressing the OFF button turns off the
fan.

Air conditioning

Press the A/C button to turn the air
conditioning system on (indicator
light will illuminate).
Press the button again to turn the air
conditioning system off.

HEAT button

Push the HEAT button to turn the
heater on (indicator light will illumi-
nate).
Push the button again to turn the
heater off.
The air conditioner and heater uses
energy from the battery. If you use
the heater or air conditioner for too
long, distance to empty can be
reduced due to increased power
consumption.
Turn off the heater and air condition-
er if not necessary.

OSKEV048308L

OSKEV048307L

OSKEV048332L

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments