manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 282 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 282

4 123

Features of your vehicle

Automatic turn off function 
(if equipped)

The interior lights automatically turn
off approximately 20 minutes after
the START/STOP button is turned
off.
If your vehicle is equipped with the
theft alarm system, the interior lights
automatically turns off approximately
5 seconds after the system is armed
stage.

Map lamp

• (1) : Press the lamps to turn the

front map lamps on an off.

INTERIOR LIGHT

CAUTION

Do not use the interior lights for
extended periods when the
vehicle is not on.
It may cause battery discharge.

WARNING

Do not use the interior lights
when driving in the dark.
Accidents could happen
because the view may be
obscured by interior lights.

OSKEV049441L

ODEEV048410

■

Type A

■ 

Type B

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments