manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 247 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 247

Features of your vehicle

88

4

Forward Collision-
Avoidance Assist (FCA)
System Warning Light 
(if equipped)

This indicator light illuminates:

• When the START/STOPbutton is in

the ON position.
- It illuminates for approximately 3

seconds and then goes off.

• When the FCA system is turned

off.

• When the radar sensor or cover is

blocked with dirt or snow. Check
the sensor and cover and clean
them by using a soft cloth.

• When there is a malfunction with

FCA. If this occurs, Kia recom-
mend that you have your vehicle
inspected by an authorised Kia
dealer/service partner.

❈

For more details, refer to “Forward
Collision-Avoidance Assist (FCA)
System” in chapter 5.

Indicator Lights

Electronic Stability
Control (ESC) Indicator
Light (if equipped)

This indicator light illuminates:

• When the START/STOP button is

in the ON position.
- It illuminates for approximately 3

seconds and then goes off.

• When there is a malfunction with

the ESC system.
In this case, have the vehicle
inspected by a professional work-
shop. Kia recommends to visit an
authorised Kia dealer/service part-
ner.

This indicator light blinks:

Whilst the ESC is operating.

❈

For more details, refer to
“Electronic Stability Control
(ESC)” in chapter 5.

Electronic Stability
Control (ESC) OFF
Indicator Light 
(if equipped)

This indicator light illuminates:

• When the START/STOP button is

in the ON position.
- It illuminates for approximately 3

seconds and then goes off.

• When you deactivate the ESC sys-

tem by pressing the ESC OFF but-
ton.

❈

For more details, refer to
“Electronic Stability Control
(ESC)” in chapter 5.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments