manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 243 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 243

Features of your vehicle

84

4

Electronic Power
Steering (EPS) Warning
Light

This warning light illuminates:

• When the START/STOP button is

in the ON position.
- It remains on until the vehicle is

started.

• When there is a malfunction with

the EPS.
In this case, have the vehicle
inspected by a professional work-
shop. Kia recommends to visit an
authorised Kia dealer/service part-
ner.

Charging System
Warning Light

This warning light illuminates:

• When the 12-volt battery level is

low or a failure occurs on the
charging system such as LDC.

• If the warning light turns on whilst

driving, move the vehicle to a safe
location, turn off and turn on the
vehicle again, and check if the
warning light turns off. If the warn-
ing light remains on, have your
vehicle inspected by a professional
workshop. Kia recommends to
contact an authorised Kia
dealer/service partner.

• Even if the warning light turns off,

Kia recommend that you have your
vehicle inspected by an authorised
Kia dealer/service partner.
If you drive the vehicle whilst the
warning light is on, vehicle speed
may be limited and the 12-volt bat-
tery may be discharged.

❈

LDC :

Low voltage DC-DC

Converter.

High Voltage Battery
Low Level Warning Light

This warning light illuminates:

When the high voltage battery level
is low. When the warning light turns
ON, charge the battery immediately.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments