manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 24 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 24

21

• You can set-up a charging sched-

ule for your vehicle using the AVN
or the UVO application on your
smartphone.
Refer to the AVN and the UVO
manual about reserved charging.

• Reserved charging can only be

done when using a AC Charger or
the portable charging cable
(ICCB: In-Cable Control Box).

• When reserved charging is set and

the AC Charger or the portable
charging cable (ICCB: In-Cable
Control Box) is connected for
charging, the indicator lamp in the
middle blinks (for 3 minutes) to indi-
cate that reserved charging is set.

• When reserved charging is set,

charging is not initiated immedi-
ately when the AC Charger or
portable charging cable (ICCB: In-
Cable Control Box) is connected.
When immediate charging is
required, use the AVN or the UVO
application on your smartphone to
deactivate the scheduled charg-
ing.

RESERVED CHARGING

Reserved Charging

OSKEVQ018006L

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments