manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 235 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 235

Features of your vehicle

76

4

Check LKA (Lane Keep Assist)
system (if equipped)

This warning message is displayed if
there is a problem with the Check
Lane Keeping Assist (LKA) system.
Have your vehicle inspected by a pro-
fessional workshop. Kia recommends
to contact an authorised Kia
dealer/service partner.

❈

For more details, refer to “Check
Lane Keeping Assist (LKA) sys-
tem” in chapter 5.

Shift to P to start charging

This message is displayed if you
connect the charging cable without
the gear in the P (Park) position.
Shift to P (Park) before connecting
the charging cable.

Remaining Time

This message is displayed to notify
the remaining time to charge the
battery to the selected target bat-
tery charge level.

Unplug vehicle to start

This message is displayed when you
start the vehicle without unplugging
the charging cable. Unplug the
charging cable, and then turn on the
vehicle.

Charging Door Open

This message is displayed when
the vehicle is driven with the charg-
ing door opened. Close the charg-
ing door and then start driving.

Aux. Battery Saver+ used whilst
parked

This message is displayed when the
Aux. Battery Saver+ function has
been completed.

❈

For more information, refer to
“Aux. Battery Saver+” in the
Electric Vehicle Guide.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments