Kia Soul 2020 Owner'S Manual Download Page 219

Page: 219 / 630

Features of your vehicle

Items

Explanation

Auto Lock

• Disable : The auto door unlock operation will be cancelled.

• Enable on speed: All doors will be automatically locked when the vehicle speed exceeds 15 km/h

(9.3 mph).

• Enable on shift: All doors will be automatically locked if the vehicle is shifted from the P (Park)

position to the R (Reverse), N (Neutral), or D (Drive) position.

Auto Unlock

• Disable : The auto door unlock operation will be cancelled.

• Vehicle Off : All doors will be automatically unlocked when the motor Star/Stop button is set to

the OFF position.

• On shift to P : All doors will be automatically unlocked if the gear is shifted to the P (Park) posi-

tion.

3. Door

❈

The information provided may differ depending on which functions are applicable to your vehicle.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Soul 2020

Reviews:

Kia Soul 2020, Owner'S Manual, Page: 219 / 630

Search results

Summary of Contents for Soul 2020

Reviews: