manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 215 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 215

Features of your vehicle

56

4

Master warning mode

This warning light informs the driver
the following situations.
- LED headlamp malfunction

(if equipped)

- Forward Collision-Avoidance

Assist system malfunction 
(if equipped)

- Forward Collision-Avoidance

Assist radar blocked (if equipped)

- Blind-Spot Collision Warning 

system malfunction (if equipped)

- Blind-Spot Collision Warning radar

blocked (if equipped)

- Smart Cruise Control with Stop &

Go malfunction (if equipped)

- Smart Cruise Control with Stop &

Go radar blocked (if equipped)

- Lamp malfunction
- High Beam Assist malfunction 

(if equipped)

At this time, a Master Warning icon
(

) will appear beside the User

Settings icon (

), on the LCD display.

If the warning situation is solved, the
master warning light will be turned
off and the Master Warning icon will
disappear.

User settings mode

In this mode, you can change the
settings of the instrument cluster,
doors, lamps, etc.
1. Head-up display
2. Driver Assistance
3. Door
4. Lights
5. Sound
6. Convenience
7. Service Interval
8. Other features
9. Reset

OSKEV048166L

OSKEV048184R

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments