manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 214 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 214

4 55

Features of your vehicle

Trip computer mode

The trip computer mode displays
information related to vehicle driving
parameters average energy con-
sumption info, tripmeter information
and vehicle speed.

❈ 

For more details, refer to “Trip
Computer” in this chapter.

Turn By Turn (TBT) mode 

This mode displays the state of the
navigation.

Assist mode

This mode displays the state of :
- Lane Safety/Smart Cruise Control

with Stop & Go

- Driver Attention Warning (DAW)
- Tyre pressure

❈ 

For more details, refer to each
system information in chapter 5.

Tyre pressure status 

❈ 

For more details, refer to “Tyre
Pressure Monitoring System
(TPMS)” in chapter 6.

OSKEV048164R

ODEEV048493N

OSKEV048165R

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments