manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 205 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 205

Features of your vehicle

46

4

Instrument Cluster Control

Adjusting Instrument Cluster
Illumination

The brightness of the instrument
panel illumination is changed by
pressing the illumination control but-
ton (“+” or “-”) when START/STOP
button is ON, or the taillights are
turned on.

• If you hold the illumination control

button (“+” or “-”), the brightness
will be changed continuously.

• If the brightness reaches to the

maximum or minimum level, an
alarm will sound.

LCD display control

The LCD display modes can be
changed by using the control buttons
on the steering wheel.

OSKEV048048R

OSKEV048151L

OSKEV048054L

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments