manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 185 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 185

Features of your vehicle

26

4

Type B - Auto down window 

(if equipped) 

Pressing the power window switch
momentarily to the second detent
position (6) completely lowers the
window even when the switch is
released. To stop the window at the
desired position whilst the window is
in operation, pull up the switch
momentarily to the opposite direction
of the window movement.

Type C - Auto up/down window 

(if equipped) 

Pressing or pulling up the power win-
dow switch momentarily to the sec-
ond detent position (6) completely
lowers or raises the window even
when the switch is released. To stop
the window at the desired position
whilst the window is in operation, pull
up or press down and release the
switch.

If the power window does not oper-
ate normally, the automatic power
window system must be reset as fol-
lows:
1. Turn the START/STOP button to

the ON position.

2. Close the window and continue

pulling up the power window
switch for at least 1 second after
the window is completely closed.

OBD048092R

OBD048405R

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments