manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 181 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 181

Features of your vehicle

22

4

WARNING

Make sure your hands, feet and
other parts of your body are
safely out of the way before
closing the tailgate.

Closing the tailgate

Lower and push down the tailgate
firmly. Make sure that the tailgate is
securely latched.

WARNING

The tailgate swings upward.
Make sure no objects or people
are near the rear of the vehicle
when opening the tailgate.

CAUTION

Make certain that you close the
tailgate before driving your
vehicle. Possible damage may
occur to the tailgate lift cylin-
ders and attaching hardware if
the tailgate is not closed prior to
driving.

WARNING

- Exhaust

fumes

The tailgate lid should always
be kept completely closed
whilst the vehicle is in motion. If
it is left open or ajar, exhaust
gases may enter the car and
serious illness or death may
result.

CAUTION

Make sure nothing is near the
tailgate latch and striker whilst
closing the tailgate. It may dam-
age the tailgate's latch.

OSKEV048069L

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments