manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 16 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 16

13

■

■

Eco Driving

Select ‘EV 

→

ECO Driving’ on the

screen.
You can check ECO level information
and ECO driving history.

Environment Contribution

Information on CO2 reduction com-
pared to petrol-fueled vehicles is dis-
played.

Eco Driving History

You can check the driving date, driv-
ing distance, and the average energy
consumption rating for the last 30
driving trips. The date with the high-
est ECO is marked with a star-
shaped icon.

EV MODE

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments