manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 15 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 15

12

Charging Location

If location-based charging is select-
ed, scheduled charging and target
temperature will be activated at the
location the driver has set. Also, the
charging current can be selected to
be applied at the designated location.

Setting Battery Charge Level

• The target battery charge level can

be selected when charged with AC
Charger or DC Charger.

• The charging level can be

changed by 10%.

• If the target battery charge level is

lower than the high voltage battery
charge level, the battery will not be
charged.

Charging Current

• You can adjust the charging cur-

rent for an AC Charger. Select an
appropriate charging current for
the charger used.

• If the charging process does not

start or abruptly stops in the mid-
dle, re-select another proper cur-
rent and re-try charging the vehicle.

• Charging time varies depending

on which charging current is
selected.

• The location-based charging fea-

ture allows you to dualize the
charging current settings at specif-
ic locations.

EV MODE

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments