manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 140 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 140

3 53

Safety features of your vehicle

The air bag modules are located
both in the centre of the steering
wheel and in the front passenger's
panel above the glove box. When the
SRSCM detects a sufficiently severe
impact to the front of the vehicle, it
will automatically deploy the front air
bags.

Upon deployment, tear seams mold-
ed directly into the pad covers will
separate under pressure from the
expansion of the air bags. Further
opening of the covers then allows full
inflation of the air bags.

WARNING  

If any of the following condi-
tions occurs, this indicates a
malfunction of the SRS. In this
case, have the system inspect-
ed by a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service
partner.
• The light does not turn on

briefly when you turn the igni-
tion ON.

• The light stays on after illumi-

nating for approximately 6
seconds.

• The light comes on whilst the

vehicle is in motion.

• The light blinks when the

START/STOP button is in ON
position.

OQL036106R

Driver’s front air bag (1)

OQL036107R

Driver’s front air bag (2)

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments