manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 134 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 134

3 47

Safety features of your vehicle

(1) Driver’s front air bag
(2) Passenger’s front air bag*
(3) Side air bag*

(4) Curtain air bag*
(5) Passenger’s front air bag

ON/OFF switch*

* : if equipped

AIR BAG - SUPPLEMENTAL RESTRAINT SYSTEM (IF EQUIPPED)

WARNING

• Even in vehicles with air bags,

you and your passengers must
always wear the safety belts
provided in order to minimise
the risk and severity of injury in
the event of a collision or in
most rollover situations.

• SRS and pretensioners contain

explosive chemicals.
If scraping a vehicle without
removing SRS and pretension-
ers from a vehicle, it may cause
fire. Before scraping a vehicle,
contact a professional work-
shop. Kia recommends to visit
an authorised Kia dealer/serv-
ice partner.

• Keep the SRS parts and

wirings away from water or any
liquid. If the SRS components
are inoperative due to expo-
sure to water or liquids, it may
cause fire or severe injury.

OSKEV038029R/OPS033052R

❈

The actual air bags and seats in the vehicle may differ from the illustration.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments