manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 13 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 13

10

Reserved Charging and
Climate Control

You can choose the time and the day
of week that you wish to charge the
battery and operate reserved climate
control to set the temperature of air-
conditioner/heater.
Also, you may select the time to start
charging using the off-peak time set-
ting.

❈

The charger and the charging con-

nector should be connected at the
reserved charging time.

Setting Departure Time

You can set the departure time by
selecting ‘EV 

→

Charge manage-

ment 

→

Reserved charging and

Climate control 

→

Next departure

time 

→

’ on the screen.

➀

Departure time: Set the time that
you wish to start  the vehicle after
charging the battery.

➁

Select the day: Set the day of the
week to activate reserved charg-
ing and target temperature for
departure time.

EV MODE

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments