manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 120 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 120

3 33

Safety features of your vehicle

Periodic inspection

It is recommended that all seat belts
be inspected periodically for wear or
damage of any kind. Any damaged
parts should be replaced as soon as
possible.

Keep belts clean and dry

Seat belts should be kept clean and
dry. If belts become dirty, they can be
cleaned by using a mild soap solu-
tion and warm water. Bleach, dye,
strong detergents or abrasives
should not be used because they
may damage and weaken the fabric.

When to replace seat belts

Entire in-use seat belt assembly or
assemblies should be replaced if the
vehicle has been involved in an acci-
dent. This should be done even if no
damage is visible. In this case, have
the system replaced by a profession-
al workshop. Kia recommends to
consult an authorised Kia
dealer/service partner.

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments