manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 114 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 114

3 27

Safety features of your vehicle

✽

✽

NOTICE

The pre-tensioner will activate not
only in a frontal collision but also in
a side collision, if the vehicle is
equipped with a side or curtain air
bag.

The seat belt pre-tensioner system
consists mainly of the following com-
ponents. Their locations are shown in
the illustration:
1. SRS air bag warning light
2. Retractor pre-tensioner assembly
3. SRS control module

WARNING

For your safety, be sure that the
belt webbing is not loose or
twisted and always sit properly
on your seat.

WARNING

To obtain maximum benefit
from a pre-tensioner seat belt:
1. The seatbelt must be working

correctly and adjusted to the
proper position. Please read
and follow all of the important
information and precautions
about your vehicle’s occupant
safety features – including
seat belts and air bags – that
are provided in this manual.

2. Be sure you and your passen-

gers always wear seat belts
properly.

OYB036043R

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments