manualshive.com logo in svg

Kia Soul 2020, Owner'S Manual, Page: 10 / 630

Share
Download
Kia Soul 2020 Owner'S Manual Download Page 10

7

If you select the “EV” menu at the
AVN home screen or press the “EV”
button on the left side of the air
intake control button, you can enter
EV mode.

❈

Refer to the car navigation system
manual for details.

The EV mode has a total of 5 menus
including Available Range, Energy
information, Charge management,
ECO driving and EV settings.

■

■

Available Range

Select ‘EV 

→

Map’ on the screen.

The available range is marked in red
on the map.

EV MODE

EV Mode

OSKEVQ018001L

Summary of Contents for Soul 2020























































































































































































































































































































































































































































































































































































































































Reviews:

No comments