Kia Sorento 2023, Owner'S Manual, Page: 600 / 640

Maintenance
64 8
Light bulbs
5. Remove the socket (A) from the
assembly by turning the socket coun
-
terclockwise until the tabs on the
socket align with the slots on the
assembly.
6. Remove the bulb from the socket by
pressing it in and rotating it counter
-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
7. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
8. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
9. Connect the rear back up lamp con
-
nector.
10.Tighten the plastic retaining screws.
11.Install the plastic tabs and the under
panel cover.
Replacing high mounted stop
lamp (LED type)
If the high mounted stop lamp (LED) (1)
does not operate, have your vehicle
checked by an authorized Kia dealer.
The LED lamps cannot be replaced as a
single component because it is an inte
-
grated unit. The LED lamps have to be
replaced with the unit.
A skilled technician should check or
repair the High Mounted Stop Lamp
(LED), for it may damage related parts of
the vehicle.
Replacing license plate lamp (LED
type)
If the license plate lamp does not oper
-
ate, have your vehicle checked by an
authorized Kia dealer. The LED lamp
OMQ4070108L
OMQ4PH071053
OMQ4PH071047