Kia Sorento 2023, Owner'S Manual, Page: 597 / 640

61
8
8
Maintenance Light bulbs
Replacing side repeater lamp
(LED type)
If the Side repeater lamp (LED) (1) does
not operate, have your vehicle checked
by a professional workshop.
Contact and visit an authorized Kia
dealer.
The LED lamp cannot be replaced as a
single unit because it is an integrated
unit. The LED lamp has to be replaced
with the unit.
A skilled technician should check or
repair the Side repeater lamp (LED), for
it may damage related parts of the vehi
-
cle.
Replacing stop and taillamp (Bulb
type)
1. Turn off vehicle and disconnect the
negative terminal from the battery.
2. Open the liftgate.
3. Open the service cover.
4. Loosen the light assembly retaining
screws with a cross-tip screw driver.
5. Remove the rear combination lamp
assembly from the body of the vehi
-
cle.
6. Disconnect the rear combination lamp
connector.
7. Remove the socket from the assembly
by turning the socket counterclock
-
wise until the tabs on the socket align
with the slots on the assembly.
8. Remove the bulb from the socket by
pressing it in and rotating it counter
-
clockwise until the tabs on the bulb
align with the slots in the socket.
OMQ4070062
OMQ4070060
OMQ4070061
OMQ4070054