Kia Sorento 2023, Owner'S Manual, Page: 55 / 640

5
2
2
Introduction Vehicle break-in process
Vehicle break-in process
By following a few simple precautions
for the first 6,000 km 4,000 miles you
may add to the performance, economy
and life of your vehicle.
僅 Do not race the engine.
僅 While driving, keep your engine speed
(rpm, or revolutions per minute)
between 2,000 rpm and 4,000 rpm.
僅 Do not maintain a single engine speed
for long periods of time, either fast or
slow. Varying engine speeds is
needed to properly break-in the
engine.
僅 Avoid hard stops, except in emergen
-
cies, to allow the brakes to seat prop
-
erly.
僅 Don't tow a trailer during the first
2,000 km (1,200 miles) of operation.
僅 Fuel economy and engine perfor
-
mance may vary depending on vehi
-
cle break-in process and be stabilized
after 6,000 km (4,000 miles). New
engines may consume more oil during
the vehicle break-in period.
Risk of burns when parking or
stopping vehicle
僅 Do not park or stop the vehicle near
flammable items such as leaves,
paper, oil, and tire. Such items placed
near the exhaust system can become
a fire hazard.
僅 When an engine idles at a high speed
with the rear side of the vehicle touch
-
ing the wall, heat of the exhaust gas
can cause discoloration or fire. Keep
enough space between the rear part
of the vehicle and the wall.
僅 Be sure not to touch the exhaust/cata
-
lytic systems while engine is running
or right after the engine is turned off.
There is a risk of burns since the sys
-
tems are extremely hot.