Kia Sorento 2010 Owner'S Manual Download Page 344

Page: 344 / 399

Maintenance

3. Install the new blade assembly in the

reverse order of removal.

Rear window wiper blade

1. Raise the wiper arm and pull out the

wiper blade assembly.

2. Install the new blade assembly by

inserting the center part into the slot in
the wiper arm until it clicks into place.

3. Make sure the blade assembly is

installed firmly by trying to pull it slight-
ly.

To prevent damage to the wiper arms or
other components, have an authorized
KIA dealer replace the wiper blade.

OHM078063

OHM078062

OHM078061

Summary of Contents for Sorento 2010
















































































































































































































































































































































































































Search results

Summary of Contents for Sorento 2010

Reviews:

Kia Sorento 2010, Owner'S Manual, Page: 344 / 399

Search results

Summary of Contents for Sorento 2010

Reviews: