manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 97 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 97

LUGGAGE CENTER BOX 
(IF EQUIPPED)

The luggage center box is located
under the floor in cargo area. You can
place a first aid kit, a reflector trian-
gle, tools, etc. in the box for easy
access.

1. Grasp the handle on the top of the

cover and lift it.

2. Detach the hook from the cover

and hang it on the top edge of the
roof.

To close the cover, hang the hook on
the bottom of the cover.

KNOWING YOUR VEHICLE

3-88

S2BLB312B

S2BLB314

CAUTION

• Do not place objects on the

tonneau cover. Such objects
may be thrown about inside
the vehicle and possibly
injure vehicle occupants dur-
ing an accident or when brak-
ing.

• Never allow anyone to ride in

the luggage compartment. It
is designed for luggage only.

• Maintain the balance of the

vehicle and locate the weight
as far forward as possible.

✽

✽

NOTICE

Since the tonneau cover may be
damaged or malformed, do not put
the luggage on it when it is used.

BL-ENG (CAN)-3.qxd  7/28/05  5:52 PM  Page 88

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments