manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 95 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 95

ANTENNA 

Fixed Rod Antenna

Your car uses a fixed rod antenna to
receive both AM and FM broadcast
signals.
This antenna is removable. To
remove the antenna, turn it counter-
clockwise. To install the antenna, turn
it clockwise.

LUGGAGE NET 
(IF EQUIPPED)

To keep items from shifting in the
trunk, you can use the four rings
located in the trunk to attach the
cargo net.

KNOWING YOUR VEHICLE

3-86

S2MS103019

S2BLB312C

CAUTION

• Be sure to remove the anten-

na before washing the car in
an automatic car wash or it
may be damaged.

•  When reinstalling your anten-

na, it is important that it is
fully tightened to ensure prop-
er reception.

BL-ENG (CAN)-3.qxd  7/28/05  5:52 PM  Page 86

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments