manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 89 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 89

STORAGE COMPARTMENT

Center Tray

To use the storage compartment,
press the front face, and then release
it to allow the storage compartment to
slowly extend from the instrument
panel.

Multi Box   

The multi box may be opened by
pulling it out by its handle grip. It can
be used for storing small items.

Center Console Storage  

To use the console storage compart-
ment, pull the cover up.

KNOWING YOUR VEHICLE

3-80

S2BLA339A

H
M

PASSENGER AIRBAG OFF

5BLA335A

LOW

AUTO

S2BLA411A

WARNING

Do not put gas lighters and
other explosive materials in the
vehicle. These may cause explo-
sion if the vehicle is exposed for
extended periods outside in hot
weather.

BL-ENG (CAN)-3.qxd  7/28/05  5:52 PM  Page 80

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments