manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 82 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 82

STEERING WHEEL

Horn

To sound the horn, press the horn
symbol on your steering wheel.
Check the horn regularly to be sure it
operates properly.

Tilt Steering (If equipped)

To change the steering wheel angle,
pull the lock release lever, adjust the
steering wheel to the desired angle,
then release the lock release lever to
lock the steering wheel in place. The
steering wheel should be positioned
so that it feels comfortable to you
when driving, while permitting you to
see the instrument panel warning
lights and gauges.

KNOWING YOUR VEHICLE

3-73

WARNING

- Tilt  Steering

• Never adjust the position of

the steering wheel while the
vehicle is in motion, or you
may lose control of the vehi-
cle.

• After adjusting,

push the

steering wheel up and down
to be certain it is locked in
position.

S R S

AIRBAG

RES

ACCEL

COAST

SET

PWR

SEEK

CANCEL

S2BLA422C

S2BLB419A

CAUTION

• To sound the horn, press the

area indicated by the horn
symbol on your steering
wheel (see illustration). The
horn will operate only when
this area is pressed.

• Do not strike the horn severely

to operate it, or hit it with your
fist. Do not press on the horn
with a sharp-pointed object.

BL-ENG (CAN)-3.qxd  7/28/05  5:52 PM  Page 73

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments