manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 76 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 76

REAR HATCH

Opening the Rear Hatch 

To open the rear hatch from the out-
side:
1. Insert the door key into the lock

and turn it counterclockwise. You
can also unlock the latch (but not
release it) with the power door lock
system.

2. Reach under the license plate light

shield and pull the rear hatch han-
dle to release the latch.

3. Pull the rear hatch back and up to

open.

Make certain that you close the rear
hatch door before driving your vehi-
cle. Possible damage may occur to
the rear hatch lift cylinders and
attaching hardware if the rear hatch
door is not closed prior to driving.

KNOWING YOUR VEHICLE

3-67

S2BLA612A

S2BLA330B

LOCK

UNLOCK

WARNING

The rear hatch swings upward.
Make sure no objects or people
are near the rear of the vehicle
when opening the hatch.

WARNING

- Rear Hatch

• Check to be sure the rear

hatch is completely closed
before driving. If the rear
hatch is open, exhaust gases
can enter the vehicle.

• Occupants should never ride

in the rear cargo area where
no restraints are available. To
avoid injury in the event of an
accident or sudden stops,
occupants should always be
properly restrained.

BL-ENG (CAN)-3.qxd  7/28/05  5:52 PM  Page 67

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments